manualshive.com logo in svg

SCS 770063, Installation, Operation And Maintenance Manual, Page: 15 / 18

Share
Download
SCS 770063 Installation, Operation And Maintenance Manual Download Page 15

TB-9080

 Page 15 of 18

© 2017 DESCO INDUSTRIES, INC.

Employee Owned

SCS 

- 926 JR Industrial Drive, Sanford, NC 27332

East: (919) 718-0000 | West: (909) 627-9634 • Website: 

StaticControl.com

3.  Toggle the joystick left to decrease the value.  

Toggle the joystick right to increase the value.  Hold 

the joystick in either direction to quickly increment 

the value. 

4.  Push down the joystick momentarily to save all 

settings.  “MEM” will appear temporarily in the 

top left corner while the settings are saved.  The 

monitor will then re-boot after the save is completed. 

 

NOTE: The monitor will automatically save the value 

on the display if idled for 10 seconds while in the 

settings menu.

EM Aware Calculator Software

Use the EM Aware Calculator to estimate ESD event 

voltages.  Simply enter the dBµV measurement from 

the EM Aware Monitor and the distance from the 

event source to the remote antenna.  The EM Aware 

Calculator will provide an approximate voltage for the 

ESD event based on CDM, HBM and MM models. 
1.  Use the link below to download the EM Aware 

Calculator Software. 

http://staticcontrol.descoindustries.com/Downloads/

EMAwareCalculator.zip

 

2.  Extract the contents of the zip folder, and run 

“setup.exe”.  Follow the on-screen prompts to install 

the software. 

3.  Run the EM Aware Calculator to estimate ESD 

event voltages based off dBµV measurements from 

the EM Aware Monitor and distance settings.

Maintenance

Cleaning

Disconnect the power adapter from the device.  Clean 

the EM Aware Monitor and its antenna using a dry brush 

or vacuum cleaner.  Clean its contacts using a contact 

cleaner or brush, and tighten all connections.  Do not 

reconnect the power adapter until cleaning is finished.

Repairs and Servicing

There are no user-serviceable parts.  Do not attempt to 

repair the EM Aware Monitor yourself.  Contact an SCS 

sales representative or authorized distributor to request 

inspection and repair.

Calibration

Contact an SCS sales representative or authorized 

distributor to request for product calibration if necessary.

Figure 16. Setting the Smart Coefficient value

Figure 17. EM Aware Calculator Software

Summary of Contents for 770063



















Reviews:

No comments