SCS Sentinel kit HWay 24V, Manual

Page: 40 / 88

40 EN
D7- Testing and checking
Make sure the general safety precaution «WARNING» has been carefully observed :
• Release the gearmotor with the proper release key.
• Make sure the gate can be moved manually during opening and closing phases with a force of max 390N
(40 kg approx).
• Lock the gearmotor.
• Using the key selector switch, push button device or the radio transmitter, test the opening, closing and stopping
of the gate and make sure the gate is in the intended direction.
• Check the devices one by one (photocells, blinker, key selector, etc.) and confirm the control unit recognizes
each device.
Photocellule 1
Photocells
D8- Recognition of LED
LED indications Descriptions
LED 1 Photocells
The LED1 turns on, when there is an obstacle between the photocells or an aligning
defect or a connection defect (Be careful, function H must be activated with a connected
photocell on PH1).
LED 2 Photocells
The LED2 turns on, when there is an obstacle between the photocells or an aligning
defect or a connection defect (Be careful, function J must be activated with a connected
photocell on PH2).
E- TECHNICAL FEATURES E- TECHNICAL FEATURES
Remote controls
Channels 4
Frequency - Maximum transmitted power 433.92 MHz - power < 10mW
Power supply 1 batterie lithium CR2032 included
Security rolling code technology