If your getting the error that
the program cannot verify
the label, be sure that you
have attached a ScripTalk
RFID label to the
prescription container.
If you get the following error when programming a label, be sure that
you have pressed the
Next
and
Previous
buttons on the ScripTalk
Station
together
,
until you hear a beep.
If you experience any issues outside of these, and need assistance,
contact En-Vision America technical support at 800-890-1180
(7:00 a.m - 6:00 p.m. Central Time Zone).
5
4
6
24
Check to see that the unit is
set to the correct Port ID.
Click on
File> Settings
, then
click ScripTalk Station
[Configure].
Click the [Gear Icon] button
.
Click [Find Port]
and then
click
[Apply].
