manualshive.com logo in svg

ScreenTronic CONTROLtronic ST2134, Operation And Installation Manual, Page: 5 / 44

Share
Download
ScreenTronic CONTROLtronic ST2134 Operation And Installation Manual Download Page 5

ST2134 Operation and Installation Manual 

 

5 

Installation 

 

General 

 

Product information and operation and installation instructions of the blind and insulating glass system 
are to be considered. 

 

 

WARNING  

  The device must be mounted and commissioned by an authorized electrician. 

  The prevailing safety rules must be heeded.  

  The device must not be opened.  

  For planning and construction of electric installations, the relevant guidelines, regulations and 

standards of the respective country are to be considered. 

 

 

Mounting 

 

The ST2134 Blind Control Module SC 4-fold is designed for installation on a DIN rail with a width of 4 
modules (72mm). 

 

Dimensions: 72mm x 90mm x 60mm (W x H x D) 

The device may be used for permanent interior installations in dry locations, within distribution boards 
or small casings with DIN rail. 

 

 

Summary of Contents for CONTROLtronic ST2134













































Reviews:

No comments