Second sealing
Raise the blind completely apply the final seal, in accordance
with EN1279-2 regulation.
The secondary sealant should be applied ensuring that the area
around the silicone tubes is completely filled either by the auto-
matic sealing machine or by hand. The silicon tubes should
remain straight and not damaged.
Where the final seal is applied horizontally any glass deflection
should be corrected by equalisation after curing i.e. the glass
surfaces should be parallel particularly in the centre. After the
polymerisation of the second seal, the protective silicon tubes
can be removed by pulling them off horizontally.
assembly instructions
12
glass assembly
double-glazed unit
second sealing
G
SL20 22M plissé_GB 15-05-2007 9:45 Pagina 12
