IN
AU
STRAL
IA
PR
OU
DLY BUILT
3
INSTRUCTIONS -
ELECTRICINEMA 235 PROJECTION SCREEN
CAN I ADJUST THE SWITCH WHILE THE SCREEN IS SITTING ON THE LIMIT - I.E. FULLY UP OR DOWN?
Clockwise adjustment? – YES. But it is better to back the screen away from the limit and then
adjust.
Anti-clockwise adjustment? - NO you will damage the micro switch if you turn it anti-clockwise
while the screen is sitting on the limit. Never attempt this. You must back the screen away from
the limit before adjustment.
After adjustment you will need to run the screen up and down to pick up the new limit.
WILL I VOID THE PRODUCT WARRANTY IF I DAMAGE THE SCREEN WHILST MAKING THESE ADJUSTMENTS?
Yes.
BEWARE
Rollers screens have a finite amount of leader, the standard being 300mm.
If you order a custom leader length then that becomes the finite amount.
DO NOT ADJUST THE BOTTOM LIMIT SO AS TO EXPOSE MORE THAN THIS FINITE AMOUNT
If you do you will:
Experience poor layflat of the surface which may bring complaints from your
customer.
Weaken the hold of the surface on the roller and, one day, the surface will be on the
floor.
THIS IS NOT COVERED UNDER WARRANTY
Should you have any questions regarding the installation of our products, please call our sales
desk on +61 2 4869 2100 for assistance
