Screen Research MCS Serial IP Adapter, Installation Manual, Page: 21 / 26

21
MCS Seria IP Adapter Installation Manual
Revision A 2007 07 06
©Screen Research 2006
9. Confirm Connection
MCS Serial IP Adapter
9. Confirm Connection
1. Connect a MCS on the SYS1 port of the MCS BRS.
Commands for the MCS are:
2. Type commands OPEN 1 and CLOSE 1 (that is to say respectively *1o01004;
et *1c01004) to test the MCS ;
==> A “click” of the relay indicates that command was understood.
If you need more information about the MCS commands list , consult the in-
stallation manual “
Motor Control System MCS-310/MCS-320”
.