Copyright Screen Excellence Ltd. 2017, Version 2.0
5
•
Determine the position of the wall screws (size
¼
”). Refer to drawing. Install 4 wall screws at
the correct distance, leaving the screw heads protruding by about
½
”.
•
As option you can order screen with top and bottom brackets. In this case you will receive 4
wall “Z” brackets. Refer to drawing position of them brackets.
•
Lift screen and test the different positions. Screen can be order in few options. RS232 –
commends are sent true computer or any devices using RS232 protocol (you can program up
to 99 positions). Connexoon – simple movement OPEN/CLOSE and one middle position
provided by wireless system and iOS/Android app (ask for more information before you decide
to use connexoon). RTS – radio control system – OPEN/CLOSE and one “My” position.
1
Connect the 2 motors to the corresponding XLR 3 pins type connectors on the connection box
CB1 – if you use RS232 control system – or to the power box if you are using RTS/connexoon
system
2
RS232: connect the connection box to the CB2 control unit with the provided 6 pin
connectors, and connect the CB2 to mains
3
Operate the motors to check the stops adjustments using remote – for RTS/connexoon or
“open” and “close” command from RS232 devices you use (go to programming guide if need
any help)
4
Check carefully in the “open” position that when the leading edge of the mask is at rest, the
motor is off
(put your hand on the roller and check that it’s not vibrating or heating).
5
If the motor is still on, it means that the stop adjustment has been lost during transport. In that
case, you will have to readjust mechanically the stop to have the mask leading edge exactly
aligned with the edge of the main frame profile. You can adjust the stops with a Hex key
(provided) at the motor head.
6
Check carefully in the “close” position that the leading edge defines exactly an aspect ratio of
1.33
7
Repeat this checks for both motors
8
Use programming guide if you need to make some changes – not recommended
Once the masks movements are satisfying, you are ready to hang the whole screen.
