Copyright Screen Excellence Ltd. 2017, Version 2.0
12
Note:
Start from here
4 3 2 1 5 6 7 8
1)
Use the spatula to insert fabric into the groove of the Gripfix from the centre to the left
2)
Use the spatula to insert fabric into the groove of the Gripfix from the centre to the right
3)
Place temporary the first stiffening bar just at the right of the centre
4)
Use the spatula to insert fabric into the groove of the Gripfix from the centre to the left
5)
Place temporary the second stiffening bar just at the left of the centre
6)
Slide the first stiffening bar to the right
7)
Use the spatula to insert fabric into the groove of the Gripfix from the centre to the right
a.
Use the spatula to insert fabric into the groove of the Gripfix from the centre to the top
b.
Do this same in the other side
c.
Use the spatula to insert fabric into the groove of the Gripfix from the centre to the bottom
d.
Do this same in the other side
e.
If needed cut the excess fabric
10.
Once the white fabric is stretched, check the evenness of the surface. The tension is not to be
excessive. In case of a problem, release locally the fabric from the profile, and insert it again.
11.
Insert the Black Backing fabric the same way in the same groove as the Enlightor fabric.
Stretch it evenly.
