manualshive.com logo in svg

Scrambler Ducati Cafe Racer 2020, Owner'S Manual

Share
Download
Scrambler Ducati Cafe Racer 2020 Owner'S Manual Download Page 83

Setting menu - Backlighting

regulation (BACKLIGHT)

This function allows adjusting the backlighting

intensity.
Enter the SETTING MENU.

Select “BACKLIGHT” option, by pressing button (1)

and (2).

Once function is highlighted, press button (4).
When entering this function, the instrument panel

will display the currently set value flashing (Fig 70).

With buttons (1) and (2) it is possible to scroll and

select (flashing) the available settings: “AUTO”,

“HIGH”, “MEDIUM”, “LOW”.

While user is scrolling the available settings, the

instrument panel will change backlighting

accordingly.

To confirm the selected value, press button (4).

The instrument panel will then set backlighting

according to the set value.
To quit the function press button (2) for 2 seconds.

1

2

4

Fig 69

1

2

4

Fig 70

82

Summary of Contents for Cafe Racer 2020







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands