Page
2
/
3
dual motors; supports TURBO function.
6) Up to four wireless Pro controllers can be connected to a Switch console simultaneously.
7) It can be used normally even during charging.
8
）
It can be upgraded by update software via connecting it to PC.
2. Key brief introduction
1) HOME key: Power controller on or execute commands from Switch console.
2) D-Pad: Up, down, left and right. It can be easily operated on eight directions.
3) Function control keys: A, B, X, Y. Perfect key design, sensitive and quick for finger operation.
4) Left stick and Right stick: Neoteric 3D stick can be operated precisely on 360° all-round.
5) Functional keys: L1, R1, L2, R2. Trigger and shoulder keys perform quick response function.
6) Screenshot key: Take screenshot and store.
7) TURBO key: First press and hold any key of the function keys (A/B/X/Y/L1/R1/L2/R2) then press
“TURBO” key once to repeat and accelerate action in a game. Press “TURBO” key once again to
cancel the repeating and accelerating function.
8) Reset key: Short press this key in “RESET” hole to disconnect controller from console and reset
the controller.
3. Connection instruction
1) Connecting to Switch Console via wireless
A. Connecting to a Switch console for the first time:
Power on a Switch console, on the main interface of the console click (by using your finger)
“Controllers” → “Change Grip/order” to come to pairing mode interface; press “HOME” key and
hold for 4s to power a controller on, four LEDs in the controller start blinking slowly and circularly
then blinking quickly and circularly after 4s, when one (or more) of the four LEDs is solid bright, it
means that the controller is paired with the console successfully; press “B” key to return to the main
interface of the console.
B. Connecting to a paired Switch console:
If a controller was paired with a Switch console ever before, just p
ress “HOME” key shortly to power
the controller on, the controller will be connected to the console automatically again.
C. Connecting controller back to Switch console:
a. If a controller is in sleeping mode, press “HOME” key shortly to wake it up, it will be connected to
the console again automatically.
b. If a Switch console is in sleeping mode, first press the power button of the console to wake the
console up then shortly press “HOME” key of the controller to connect it back to the console (If a
Swit
ch console is in sleeping mode, the console can’t be woken up by directly pressing any key of
the controller.).
2) Connecting to Switch Console via USB cable
On the main interface of a Switch console, click “Settings” → “Controllers and Sensors” → “Pro
Co
ntroller Wired Communication” → “ON” to open Pro controller wired connection; connect a
controller to the USB port of the console holder through a USB cable, LED 4 in the controller starts
blinking slowly then LED 1 in the controller will be blinking slowly after the controller is connected to
the console.
3) Connecting to Windows PC via USB cable
