background image

2

If the pin does not slide easily into the receptor, 
press  the  button  on  the  frame  near  the 
attachment point. 

Detaching the Front and Rear Wheels 

Press  the  wheel  release  buttons  by  the 
attachment  points  on  the  left  and  right  rear 
wheels  to  release    (Fig.  3).  Release  the  front 
wheels  by  pressing  the  grey  buttons  on  the 
frame near the attachment points. 

Unfolding the Frame

 

To unfold the frame, grasp the base of the 
handle and lift. The back wheels will expand. 
Press the telescoping frame release button (Fig.
7) and pull upward to raise the telescoping 
frame. The frame is correctly positioned when 
the lock pin protrudes slightly from the top hole 
on the side of main frame (Fig. 5). 

Adjusting & Locking the Handle 

The handle is adjusted and locked into place by 
the metal thumb lever (Fig. 6). Place the handle 
in your preferred position, then push the thumb 
lever  down  to  lock  the  handle  into  place.  To 
lower the handle, lift the thumb lever upward.                                 

Attaching and Removing the Top Basket

 

Align the wide opening along the rim of the smaller basket 
with the hook on the cart front (Fig. 8). Press the basket rim 
into the hook and lock. Next, fit the top basket base into the 
mounting bracket on the main frame. To remove the top 
basket, press the lock tab above basket hook downward. 
While holding the basket at both ends, lift upward. 

Attaching and Removing the Bottom Basket 

To attach the bottom basket, first release the lock 
mechanism by pushing the 

PRESS

 button located on the 

front of the cart frame (Fig. 8). Place the basket under the 
hooks near the main frame. Align the basket wire with the 
groove on the lock mechanism and then push the sliding 
lock shut. The basket is locked into place when the 

PRESS

 

button and the sliding lock align (Fig. 8). To remove the 
bottom basket, push the 

PRESS

 button. Slide the bottom 

basket out of the rear hooks and lift.

Lock 

Pin

Hook 

& Lock

Telescoping 

frame release 

Important: 

Do  not  push  the  telescoping  frame  release 

button (Fig. 8) when the top basket is attached to the cart. 
Always  remove  the  top  basket  before  lowering  the 
telescoping frame section.

Figure 5.

Figure 7.

Figure 6.

Figure 8..

Using the Foot Brake 

Press downward on the 
foot brake to engage the 
lock. Press again to release 
the lock. Engage the brake 
before folding and storing 
the cart to prevent it from 
rolling.

Locking the Folded Frame

 

Lock the folded frame to store the Scout Cart® in a 
standing position. After folding the frame, grasp the 
handle near the thumb lever and pull the telescoping 
section forward until the upper basket hook (Fig. 7) locks 
into the lower basket lock mechanism (Fig. 8).  To unlock 
the folded frame, press the frame release button, which 
allows the telescoping section to slide out of the locked 
position. 

Enjoy Your Scout Cart.®

Reviews: