Scout MT-700 ENT, Operation Manual

Page: 63 / 155

МТ-700 fleet tracking system 63
Figure 60
. Traffic accident sensor
Traffic accident sensor
( Figure 60 ) incorporates the following settings:
Collision: X, Y threshold
– acceleration value (in mg), determined as the acceleration vector
projection on the X and Y axes, after exceeding which, the event is fixated.
Collision: Z threshold
– acceleration value (in mg), determined as the acceleration vector
projection on the X and Y axes, after exceeding which, the event is fixated.
Strong collision on X, Y axes
– look: collision: X, Y threshold.
Strong collision on Z axe – look: collision: Z threshold.
If a collision took place, then data is being send to the server, and the dispatcher can see
it in the “SCOUT Configurator”.
Also, the SMS-notification can be set up. In order to achieve this – turn on the option in
(SMS-Settings > SMS-notifications) in SCOUT –Configurator.

Ports configuration
The Settings of the connected auxiliary devices are shown in the “PORTS” tab of the
configurator. The common view of it is shown in
Figure 61 .