Scout MT-700 ENT, Operation Manual

Page: 27 / 155

МТ-700 fleet tracking system 27
Figure 18
3. Cable zip ties.
3.1. Another option to mount the terminal is by fixing it to a horizontal tube or a beam.
In order to achieve this, the zip tie should be put through the lids’ apertures and tied (
Figure 19 ).
Make sure that the tracker does not move on the zip tie.
Figure 19
3.2. Also, it is possible to tie a terminal to vertical parts ( Figure 20 ). Make sure that the
tracker does not move on the zip tie.
Figure 20
1.1. Other option is to anchor the tracker to two vertical objects. In that case, one zip tie should
be used for each side of the tracker (
Figure 21 ). Make sure that the tracker does not move
on the zip tie.