10
Clip the snap of the Power Grip release to the downrigger weight.
9.
Attach your fishing line to the Power Grip release by squeezing
the jaws apart and placing your fishing line between the pads. You
can adjust the release tension by placing the fishing line further
into the jaws. To further increase the release tension you can
move the tension adjuster slider to the out position.
With your fishing rod in a rod holder, set the tension on your reel
10.
so that the line will pay out, but with enough drag tension so that it
doesn’t free wheel. It is important to have your fishing line tight to
the downrigger line because you may lose the fish if it has slack
line after releasing off the downrigger.
The downrigger weight is lowered by moving the brake handle in a
11.
clockwise direction. You can go as fast or as slow as you wish, but if
you are using a flasher or dodger it is best to descend at a slow,
even rate to eliminate fouling the flasher or dodger with the
downrigger cable.
After each use, it is advisable to rinse off your downrigger with fresh
water to avoid salt build-up. The unit is made of non-corrosive materials,
but a build up of salt and seaweed could affect performance.
