Scotts S2048, S2554 Operator'S Manual Download Page 47

Page: 47 / 95

Service Engine - Page 41

SERVICE ENGINE

Cleaning Air Intake Screen and Engine Fins

1. STOP engine. LOCK park brake and remove key.

2. Lift hood.

Picture Note: Model S2554 shown for photo purposes.

3. Clean air intake screen (A), oil cooler fins (B) on
Model S2554, and external surfaces, with rag, brush,
vacuum or compressed air. Lower hood.

Checking and Cleaning Air Cleaner
Elements

NOTE: It may be necessary to check the air filter
more frequently if operating vehicle in dusty
conditions.

1. Lift hood.

Picture Note: Model S2554 shown for photo purposes.

2. Clean any dirt and debris from the air cleaner area
before removing cover.

3. Remove cover (A).

IMPORTANT: To avoid overheating and damage to
engine: Keep air intake screen free of dust.

Keep cooling fins free of dust.

Keep cooling shrouds in place.

M97151

Summary of Contents for S2048, S2554
































































































Search results

Summary of Contents for S2048, S2554

Reviews:

Related manuals for S2048, S2554

Brands by name

Popular brands

Scotts S2048, S2554, Operator'S Manual

Search results

Summary of Contents for S2048, S2554

Reviews:

Related manuals for S2048, S2554

Brands by name

Popular brands