8
scott-sports.com
9
GAMBLER
BIKE OWNER’S MANUAL
ADJUSTABLE BB HEIGHT
BB STANDARDS
On the Gambler you can adjust the BB height above ground for 10mm between its 2
positions by a geo-chip.
Low position is at a BB offset of +0mm, high position is at +10mm offset.
In order to change the set-up please un-tighten the shockmount bolt with a 6mm allen
key.
“Flip-flop” the “geo-chip” on both sides as shown in the drawing below and tighten the
shock mount bolt again with a maximum tightening torque of 35Nm/ 308in/lbs.
On Gambler you will find 2 different BB options, depending on the model you bought:
1. BB PF 104 with a housing
width of 104mm and an
inner diameter of 41mm
for PressFit bearings
2. Standard threaded BSA
with 83mm housing
width for threaded
assembly bearing sets
ENGLISH
