Progression:
LOW
BB Height:
HIGH
Progression:
LOW
BB Height:
LOW
Progression:
HIGH
BB Height:
HIGH
Progression:
HIGH
BB Height:
LOW
140mm
155mm
ENGLISH
ENGLISH
•
HEIGHT AND PROGRESSION ADJUST
The lower shock mount is adaptable for a high or a low BB height as well as adjusting the
progression. It is recommended that if 27.5” wheels are fitted the flip chip is set in the “High”
position.
For the long chain stay position follow the below setup positions.
Brake mount uses the Front mount holes
(Most rear position)
Flip chip has the axel in the rear position
When fitting the rear axle ensure the groove in the head of the axle meets the dropout
securing nut correctly.
Note: dropout securing bolt 1.5NM
Note:
it is normal for the rear derailleur and dropout to have movement and feel loose when
the wheel is not fitted. Do not over tighten the securing bolt to compensate for this, once the
wheel is fitted this movement will disappear.
High settings
Low settings
This flip chip and shock mounting bolts are available separately,
lower shock bolt 10NM.
•
MAXIMUM SEATPOST INSERTION
Riders must pay attention to the maximum/minimum
seatpost insertion on the Gambler, there is only 15mm
of up and down movement in the seatpost available,
the rider must cut the seatpost to the required
length and always pay attention not to exceed the
recommended height.
Maximum insert 155mm
Minimum 140mm
07 |
BIKE USER MANUAL |
GAMBLER 2020
GAMBLER 2020
| BIKE USER MANUAL
| 06
