background image

USING THE RADIO

Listening to the FM radio

1.  Press the 

RADIO ON/OFF

 button to turn on the radio.

2.   Turn the 

TUNING

 dial to search for an FM station. The 

TUNING

 dial indicator points to the 

 

selected frequency. 

3.   Adjust the volume by turning the 

VOLUME

 dial.

4.   To turn off the radio, press the 

RADIO ON/OFF

 button.

Note: Extend and position the FM antenna wire to achieve optimum reception.

 

TROUBLESHOOTING GUIDE

Problem

Solution

1.   The unit or display is not  

 

working properly

1.1  Press the RADIO ON/OFF button to go to Standby 

 

mode and press it again to turn on the unit.

1.2  Reset by unplugging the AC/DC adapter for few 

 

seconds, then plug it back in.

2.   Outdoor readings are not  

 

being displayed properly

2.1  Place the remote sensor closer to the main unit. 

2.2  Replace the sensor batteries.

3.   Noise or distorted sound  

 

in radio mode

3.1   Extend and position the FM antenna to improve 

 

reception.

 

MAINTENANCE

Care and maintenance

To clean the casing, unplug the unit and wipe off dust and stains with a soft, damp cloth. Do not use 

benzene, thinner or similar chemicals to clean the casing.

If at any time in the future you want to dispose of this product, please note that waste 

electrical products should not be disposed of with household waste. Find out where your 

nearest recycling centre is. Consult your local authority or retailer for more details. 

(Waste Electrical and Electronic Equipment Directive)

GB 6

Summary of Contents for CXT 20









Reviews: