Maintaining the Device
47
SCOTT SAFETY
087-0038 REV L
•
Canned compressed air (Electronic Grade)
1
Using the T8 Torx head driver, remove the four (4) Torx head screws located on the
back of the pump assembly. See
Figure 34
Removing Pump Screws
2
Lift the back cover off the pump enclosure and remove the pump retaining plate.
This allows access to the pump. Gently lift the pump out of the pump enclosure.
See
.
Figure 35
Disassembly of Pump
3
Carefully remove the tubing from the pump ports.
Caution:
Use only the minimum force necessary to remove hoses from ports. Pump
ports break easily if excessive force is used.
To easily identify hoses for reinstallation, attach locally generated labels to the hoses.
The short hose is the OUTLET and the long hose is the INLET.
Pump Retaining
Plate
Pump Access
Back Cover
Summary of Contents for Protege
