Assembly Instructions
1. Attach each arm assembly to the water feature. Be sure to orient the arms with “L” facing upward.
Remove one of the 2" bolts attaching the float to your Scott water feature and align the holes with the
stainless steel arm. Reinsert the bolt with washer, outward through the housing, float and stainless steel arm.
Secure with washer and nut. Repeat for second arm assembly.
2. Continue by attaching each light to the slotted end of the stainless steel arms. Feed 1/2" x 1/4" bolt
downward through each light bracket and steel arm then secure with 1/4" nut. The lights can be
positioned along the arm by loosening the lock nut, sliding the light to the desired position, then
re-tightening the nut.
3. Connect the lights to the Timer Control Unit by aligning pins and screwing the connector together 1/2 turn
only. Do not force the connection tight or you may damage the O-ring or wiring.
Note: Be careful not
to over-tighten the
wire connection.
It is designed to lock
with 1/2 turn.
