Scotsman NU100 Series, User Manual

Page: 6 / 20

NU Undercounter Ice Maker User Manual Summary
B4
Safety instruction
In order to ensure the machine works normally
for a long time, before installation, please read
the manual carefully and follow it strictly. The
manufacturer is not responsible for any
damage or bodily injury due to ignoring the
safety instructions. If there is any doubt, please
contact the local dealer.
Installation requirements
Please consider the following items in
determining the installation location:
 Power source: the power switch for the ice
maker should be easily reachable, be sure
that the power supply is reliably grounded.
 Water supply: the water supply switch
should be easily reachable.
 Water drain: be sure that the drain pipe
extending from the unit has a minimum 3
cm drop per meter.
In order to reach its high performance and
ensure durability,
please pay attention to the
following items:
 The water temperature should be between
5
℃
to 35
℃
.
 The water pressure should be between 1
bar to 5 bar.

The power supply should be accordance
with the requirements on the nameplate.

The fuse of the power supply switch should
be a bipolar fuse. The gap between the
bipolar should be more than 3mm.
 The working ambient temperature should
be between 10 ℃ to 40 ℃ .
 For the required ventilation, the distance
between the machine and the wall on the
sides and back should be more than 150
mm.
 Be sure the machine is leveled correctly.
 Don’t hang curtains or pile goods around
the machine to avoid overheating caused
by bad ventilation, be sure there is no heat
source (such as a stove, oven, etc.) around
the machine and the working environment
of the ice maker should not be overly humid
。
Note
：
In order to avoid any hygiene and health safety issues,
the water for making ice should be potable. If needed,
please install a water filter or water processor.