FOR THE INSTALLER
This machine is designed to fit the following
Scotsman storage bins:
B90 and extensions (with bin top KBT18)
BH800 using bin top KBT15 (one unit).
BH800 (two units, no bin top required).
BH900 with KBT24 (one unit)
BH900 with KBT25 (two units side by side)
When installing a new system, check to be sure
that everything is on site before beginning:
Correct Bin
Correct Ice Machine
Correct Bin Top (if required)
All kits, legs, and information required for
the specific job.
Installation Limitations:
This ice system is designed to be installed indoors,
in a controlled environment:
Min
Max
Air Temperature
50
0
F
100
0
F
Water Temperature
40
0
F
100
0
F
Water Pressure
20 PSI
80 PSI
Voltage
-5%
+10%
(Compared to the nameplate)
Operating the machine outside of the limitations is
misuse and can void the warranty.
The normal finish for the ice machine is
enamel-sandalwood. A stainless steel panel kit,
SPKFM21 may be field installed to convert the unit
to a stainless steel finish.
ELECTRICAL
INLET
WATER
INLET
7.3"
5.25"
3"
3.4"
7.46"
Condenser Inlet 3/8" FPT
Condenser Drain 1/2" FPT
DRAIN
3/4" FPT
4.9"
2.9"
9.43"
BACK VIEW: WATER COOLED
SPECIFICATIONS : ICE MAKER
ELECTRICAL
INLET
3"
2.1"
5.7"
WATER INLET
3/8" FLARE
DRAIN
3/4" FPT
BACK VIEW: AIR COOLED
5.25"
9.5"
Note: Allow 6"
behind and 6"
above either unit
for air circulation,
utility connections,
and service.
Refrigerant Charge*
Air Cooled
30 oz
R-404A
Water
Cooled
24 oz
R-404A
* Always go by the
nameplate charge.
Model Number
FME1200AE-3A
FME1200WE-3A
FME1200AE-32A
FME1200WE-32A
NME950AE-3A
NME950WE-3A
NME950AE-32A
NME950WE-32A
Dimensions
(w/o bin)
W x D x H
21" x 24" x 27"
same
same
same
same
same
same
same
Basic
Electrical
208-230/60/3
same
208-230/60/1
same
208-230/60/3
same
208-230/60/1
same
Ice Type
FLAKE
same
same
same
Nugget
same
same
same
Condenser
Type
Air
Water
Air
Water
Air
Water
Air
Water
Note: 50 Hz (-6) models have
also been produced.
NME950 & FME1200
January 1995
Page 2
