August 2013
Page 13
Service Manual for Models CU0415, CU0715 and CU0920
7. Drain the reservoir into the storage bin by
removing the drain plug. Return the drain plug to
its normal position.
8. Wash all interior surfaces of the ice machine
storage bin, reservoir surface and inside of the
door with the remaining sanitizer solution.
9. Pour any excess sanitizer down the ice machine
bin drain.
10. Pour 2.5 quarts or 2.4 liters of warm (95
o
F/35
o
C to
115
o
F./46
o
C) water into the reservoir by adding it
at the reservoirs’ front lip.
11. Move the master switch to the Wash position for 1
minute, then switch it to Off.
12. Drain the reservoir by removing the drain plug and
draining the solution into the bin. Return the drain
plug to its normal position.
13. Move switch to the On position. The machine will
resume normal ice making.
14. Return the front panel to its original position and
secure it with the original screws.
Cleaning the Condenser
1. Remove the front panel.
2. Switch the machine to OFF.
3.
Vacuum the surface of the condenser fins,
carefully brush off any loose dirt. If grease is
imbedded use coil cleaner to wash it out.
4. Switch the machine to ICE.
5. Return the front panel to its original position.
