SCOTLE Scotle-HR460C, Manual

Page: 13 / 27

Shenzhen SCOTLE Technology
-----------------------------------------------------------------------
Email:sales@scotle.com Tel:86075589378931 http://www.scotle.com/
------------------------------------------------------------------------------------------------
contact with the object , because it may cause fire or explosion ,and the
PCB work piece should be placed on the PCB support shelves.
3. Do not shake BGA rework station, and move gently.
4. Do not touch the high fever area to avoid get burned.
5. When turned on, do not use the flammable spray, liquid or flammable gas
near the repair station.
6. Do not try to modify BGA rework station when in power , otherwise it will
cause fire or electric shock.
7. Electrical box has the high-voltage components, do not attempt to
disassemble it.
8. If the metal objects or liquids fall into the repair station when it works ,
immediately disconnect the power , unplug the power cord until the
machine to cool down , then completely remove litter , dirt ; if dirt
left ,there is odor when reboot.
9. When abnormal heating or smoking immediately disconnect the power , and
inform the technical service to repair. It needs to disconnect the wires
between the electrical boxes and machine parts, and have to hold the plug,
otherwise it leads to poor contact ,and does not work.
10. Note that the repair station not to press or run over other electrical
equipment or power lines or communication cable , and it may cause
device malfunction or cause fire or electric shock.
Scotle HR460C touch screen use:
Operation steps:
1. Power on to turn on the SCOTE HR460C BGA rework station