�
LED Status
TESTING QI MODULE (MQUSM)
Cont'd
LED CHARGING STATUS:
The LED indicator on the side of the mount illuminates the charging sta
tus of the device. When powered ON, the indicator blinks in the following
order: BWE, GREEN, BLUE.
Standby = Green
Charging = Blue
ASSEMBLY PREPARATION
NOTE: For a more accurate result, place the Qi bezel without the module (MQUSM) into the vehicle's
armrest. Once bezel is in place use a contrasting chalk or marker and place a mark for the hole location, see
illustrations below for details.
Fl
1. Place the Qi bezel into armrest and place 2. Carefully make a hole through the armrest
a mark where the hole will be located,
tray large enough to pass the Type-C
then remove the bezel.
connector
(tray mat is not retained).
CONNECTION ROUTING
CONNECTION ROUTING
Make all of the necessary wiring connections with the
provided vehicle I-harness at the center console's back
panel. Use the diagram illustrated on page 5 (Testing
Connection) for connection details. You may also use
the illustration on the right for recommended harness
location details.
Note: When routing the type-c
connector to the center console 's lid, we
recommend routing through either the
left or right lid hinge opening. See the
illustration at right for example.
6
