If prompted by your cell phone to connect, select “Yes” (this will vary
among cell phone models). After successful connecting, blue LED will
flash twice every 4 seconds.
Remarks:
The receiver can remember 8 paired devices. When the number of
devices exceeds 8, the first one will be replaced.
If the phone and receiver over range, the receiver will disconnect and
enter standby mode. It will connect automatically if phone and receiver
back to available range in 5 minutes. You also can select BTRH on the
phone after 5 minutes.
3) Pairing with Bluetooth transmitter
You can pair receiver with Bluetooth transmitter to enjoy wirelessly music.
Hereby take BTT001 (Bluetooth transmitter for iPod, not included) for
example. The pairing steps are as follows:
Keep the Bluetooth transmitter and the receiver within 1 meter when
pairing;
Make the receiver enter pairing mode (please refer to “How to enter
pairing mode);
Plug the Bluetooth transmitter into cell phone and activate it. The
transmitter will search device automatically and start pairing;
When the receiver requests PIN No., the Bluetooth transmitter will
respond “0000” automatically;
After successful pairing and connecting, blue LED of the receiver blinks
twice every 4 seconds.
Note:
The pairing password of the receiver is “0000”. So, the receiver can only
pair with a Bluetooth transmitter whose pairing password is “0000”.
If pairing still fails after several tries, please refer to the Bluetooth
transmitter’s user’s manual for further information.
4.
Supply power for other device charging
The USB port of receiver can provide DC5V-1A for other device charging.
You also can charge your device by BTRH through USB cable.
3