background image

Crown Liner Removal

6

5

Aero Skirt Removal 

Occassionally the crown liner may require 
removal for washing, replacement or to 
change sizes.

First step is to remove the Cheek Pads. 
(refer to page 4).

At the back of the helmet pull the crown 
liner away from the shell.

Pull the crown liner out of the helmet while 
gently detaching it from the forehead 
channel.

Reverse this process for installation.

The pliable Aero Skirt was designed to 
reduce wind from entering behind the 
face shield area, specifically to keep 
your face warmer in cold weather.

You do however have the option to 
remove the Aero Skirt  for cleaning or 
for warmer riding conditions.

TO REMOVE
Simply tug on the Aero Skirt and it 
slides out of the rubber trim channel.

Reverse this process to re-install.
 

L

L

U

P

Crown Liner Removal

6

5

Aero Skirt Removal 

Occassionally the crown liner may require 
removal for washing, replacement or to 
change sizes.

First step is to remove the Cheek Pads. 
(refer to page 4).

At the back of the helmet pull the crown 
liner away from the shell.

Pull the crown liner out of the helmet while 
gently detaching it from the forehead 
channel.

Reverse this process for installation.

The pliable Aero Skirt was designed to 
reduce wind from entering behind the 
face shield area, specifically to keep 
your face warmer in cold weather.

You do however have the option to 
remove the Aero Skirt  for cleaning or 
for warmer riding conditions.

TO REMOVE
Simply tug on the Aero Skirt and it 
slides out of the rubber trim channel.

Reverse this process to re-install.
 

L

L

U

P

Summary of Contents for Exo-R410













Reviews: