9. Feed the charging cable through before attaching
Scorpion to the base.
10. Place the installed device into the receiver. Press
the lock in to secure. Scorpion should now be locked
into place.
8. To lock axle, insert the blue key into the center of
the Scorpion Body located on the back side of the
device. Turn the blue key clockwise to tighten the
screw and lock the axle into place.
IMPORTANT
Do not over tighten the leveling plate. If you
see a bump or bubble in the screen, or bend
in the device, the leveling plates are over
tightened. Please refrain from over tightening
as this may damage the device.
*IMPORTANT* MUST LOCK AXLE TO FULLY SECURE