manualshive.com logo in svg

SCORPION Commander 26V SBEC series, User Manual, Page: 4 / 4

Share
Download
SCORPION Commander 26V SBEC series User Manual Download Page 4

8.0 Trouble Shooting 

 

 

If you hear a pulsed warning tone and/or see a continuous 

orange flashing LED after powering up the ESC:  

 

Check your transmitter. Is it on? If yes.  
 

Check that your throttle is at its minimum position. Your esc 

will not arm if you throttle is anything other then zero at 

startup  

 

Check the ESC servo connection? Connection good? If yes.  
 

Check the motor connection to the ESC, reconnect them if  

necessary.  

 

Check your battery. Fully charged? Replace battery if 

necessary.  
 

Try another receiver.  

 

Disconnect battery and then reconnect battery and start at 

step 2.0 again 

 
 

 

 

 

 

 

 

 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

Connecting your ESC Diagram 

 

 
 

 

Summary of Contents for Commander 26V SBEC series

Page 1: ...f the ESC to the length you require We recommend using bullet connectors to connect your esc to your motor as scorpion motors come with pre installed bullet connectors that include a female set for your ESC Solder the corresponding connectors for your motor to the wires coming from the ESC or solder the motor wires directly to the motor leads You may find it convenient to temporarily connect the m...

Page 2: ...ry the ESC the only solution to this is to never use a Motor that has a rating bigger then the ESC don t even think you can use it if you run the motor at a slower RPM or load it will not work Thermal Protection At 95 degree C the ESC will slowdown the power output to the motor by 50 the on board LED will flash red to re initiate full throttle you need to move the throttle stick to idle position a...

Page 3: ...gged into throttle channel 12 second delay to 50 of set speed Soft start with governor mode see GOV function Requires use of a spare channel other then the throttle channel RO Motor Rotation direction 1 2 Clockwise Counter clock wise TIM Motor Timing 1 2 3 4 5 6 Auto Timing 5 15 20 25 30 GOV Governor 50 60 70 80 90 50 RPM 60 RPM 70 RPM 80 RPM 90 RPM SB Motor Start Booster 1 2 ON OFF ENTER Enter va...

Page 4: ... minimum position Your esc will not arm if you throttle is anything other then zero at startup Check the ESC servo connection Connection good If yes Check the motor connection to the ESC reconnect them if necessary Check your battery Fully charged Replace battery if necessary Try another receiver Disconnect battery and then reconnect battery and start at step 2 0 again Connecting your ESC Diagram ...

Reviews:

No comments