USE OF GE 230/1000
INFLATE
1. Connect the inflating tube to the outlet port of the GE 230/1000 and to the inflatable,
using the fitting provided
2. Connect the Power Supply Plug to a 230 Vac Socket
3. Turn ON the main switch
WARNING: THE AIR FLOW CAUSE THE ROTATIOS OF THE PUMP ON ITS AXIS. DURING THE
STARTING IT’S RECOMMEND TO HOLD THE PUMP.
4. Turn OFF the main switch when the inflatables will reach the prescribed pressure.
WARNING: EXCEEDING THE PRESSURE RATING COULD CAUSE THEM TO EXPLODE
RESULTING IN PERSONAL INJURY.
DEFLATE
1. Connect the Adapter for deflation (in photo) to the base of pump.
2. Connect the inflating tube to the adapter to deflate the inflatable
3. Connect the Power Supply Plug to a 230 Vac Socket
4. Turn ON
5. Turn OFF when the deflation in completed
TROUBLESHOOTING
ACCESSORIES
Recommended accessories for your GE 230/2000 are available from your dealer.
WARNING: USE OF ACCESSORIES NOT RECOMMENDED FOR THIS PRODUCT
CAN BE DANGEROUS.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Inflator doesn’t start
Inflator does not
inflate/deflate
Power cord not connected
Main switch OFF (0)
The power cord is damaged.
Damaged FUSE
Overheating
Hose connected to
the wrong port
Connect the cable correctly.
Put the switch to ON. (1)
Replace or repair the cable from a Scoprega Service
Center.
Unplug the power cord and replace the fuse
Wait till the GE230/1000 has cooled down.
Operation will resume automatically
Connect the hose
to the proper port
Summary of Contents for GE 230/1000
Page 7: ...NOTE ...
