background image

Scope Xlite USA Version

 

 

XliteUSA 01/00 

 

Issue 1 

3

 

 

PREFACE 

 
 

Warranty 

 
This product is warranted as free from defects of workmanship and materials for a period of one year from 
the original purchase date. During this time, if there is a defect or malfunction of this product, Scope will, 
with proof of purchase, repair or replace at its discretion any defective parts, free of charge. This does not 
include where the adjustments, parts and repair are necessary due to circumstances beyond the control 
of Scope, including but not limited to fire or other casualty, accident, neglect, abuse, abnormal use or 
battery leakage damage. 
 
There are no other expressed or implied warranties except as stated herein, and those excluded include 
those of merchantability and fitness for a particular purpose. In no event will Scope or any of its agents be 
liable for direct, indirect, special incidental or consequential damages resulting from any defect in the 
product, even if advised of the possibility of such damages. 
 
The warranties and remedies set forth above are exclusive and in lieu of all others, oral or written, 
expressed or implied. No Scope distributor, dealer, agent or employee is authorized to make any 
modification, extension or addition to this warranty. 
 
Some states do not allow limitations on how long an implied warranty may last and some states do not 
allow exclusions or limitation of incidental or consequential damages. 
 

Warning ! No User Serviceable Parts 

 
Alteration or modification to any part of this equipment, without the prior written consent of the 
manufacturer, will invalidate all manufacturer approvals and warranties.  No adjustments can be 
undertaken except by qualified and licensed persons as defined by the FCC Rules and Regulations. 
Operation of altered equipment can result in fines, imprisonment, and/or confiscation of such equipment. 

 
 
 
 

© Scope Marketing (Communications UK) Ltd, 2000 All Rights Reserved 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for X Lite MK1 XLUK













Reviews: