Scooty Kick, Original Instructions Manual

Page: 13 / 20

13 13
7. MAINTENANCE AND CLEANING
Your product requires routine inspection and maintenance.
This chapter describes maintenance and operation steps�
Before performing the following operations, make sure that the power is
off and that the charging cable is unplugged.
7.1 INSPECTING AND CLEANING YOUR DEVICE
Periodically check the column, the head tube and the handles.
We recommend you periodically check whether the screws are properly
tightened and tighten them if necessary� These adjustments may be needed
because of vibrations caused by using the device�
Here are some instructions and precautions for cleaning the device:
• Unplug all the device’s charging cables before cleaning it�
• Do not immerse it in water.
• Do not use a high-pressure cleaner, water jet or any other appliance or
washing method that would allow water to seep into the device.
• Clean the device with a sightly damp sponge or a soft cloth, avoiding the
connectors and buttons and making sure water is not allowed to seep
into the plugs, circuits or inside the product.
• Do not use water or liquid cleaners directly on the device to clean it.
• Do not use abrasive products or solvents as these could damage the
paint on your device�
• Be careful when cleaning and wiping plastic parts.
• Do not use abrasive products or solvents to clean metal or plastic parts�
7.2 MAINTAINING YOUR DEVICE
If the product, a component or the battery is worn, please contact an
authorised service centre to have your product repaired or recycled�
7.3 STORING YOUR DEVICE
• Fully charge your device before storing it.
• Store your product indoors in a clean and dry place with an ambient
temperature ranging from 0°C to 40°C.