Scootworks, Inc.
2
(Fig.1)
4.
Insert the flat head screws into the mounting tabs, followed by the spacers. See photo above.
5.
Place the sissy bar assembly on the motorcycle and bolt the (4) screws on the sissy bar onto the motorcycle. Use
the 8mm locking washers and nuts under the fender and tighten. The assembled sissy bar should look like the
photo below.
(Fig.2)
6.
Replace the seat on the motorcycle and tighten the screws.
This is a good time to take some photos of your bike to
send to us and your friends! Send your photos to [email protected] and we’ll put it in the “Photo
Gallery” section of our website.
7.
As with any proper maintenance program, you should periodically check all bolts on your motorcycle to ensure
they are properly tightened. Keep the beautiful finish on your new sissy bar with Flitz chrome polish and sealant,
available at Scootworks.