Scooterpac Invader, User Manual

Page: 20 / 44

Scooterpac Invader | User Manual 20
9.5 Ignition
9.5.1 Turning on
Below the front display you will find the ignition barrel.
1. Turn the key to position 1 to turn the Invader on. The key cannot be removed while it is in the on position.
2. Turn the key to position 2 to turn the unit off.
3. Turn the key to position 3 to engage the steering lock. For more information on how to engage the steering lock
please read below.
Do not turn the unit on until you are properly seated on the Invader.
9.5.2 Steering Lock
As an added level of protection, the Invader comes with a steering
column lock that prevents the wheel from turning to prevent theft.
To engage the steering lock you must do the following:
1. Turn the handlebars so they are pointing to the left (as if you
were sitting on the machine)
2. Put the key into the position 2 (see fig. 6) and
push down while turning counterclockwise.
3. Once it is in position 3 (see fig. 6) remove the key
and reverse this process to disengage the steering lock.
Figure 10 – Ignition barrel