7
Changing the Oil
The oil should at a minimum be changed after the first 300km (180 miles) and
every 1000km (600 miles) after
that. It doesn t hurt to change it
after the first 50 miles. New
engines can produce small
shavings in the first few miles
that can be abrasive to the
internal parts.
It helps for the engine to be
warmed (not hot) at the time of
change.
Place a drain pan under the
drain plug. Remove the filler cap, then
remove the drain plug
.
When you remove the drain, these parts will come out
5=screen filter, 6=spring, 7=gasket, 8=plug
.
Blow out the screen with compressed air to clean.
Gently depressing the kick starter five or six times
will flush out remaining oil that does not drain freely.
Make sure the ignition switch is in the off position
while doing this.
After oil is thoroughly drained, replace plug
components in the configuration shown.
Summary of Contents for GY6
Page 18: ...18 Torque Settings for 50cc Scooter ...
Page 19: ...19 Torque Settings 150cc Scooter ...
Page 20: ...20 TORQUE SETTINGS 150CC ...
