Scolmore Click Smart Box Installation & Control Manual Download Page 4

Page: 4 / 42

www.click-smart.com

Introduction

With the CSB040 Click Smart Box connected to your router (Ethernet cable), it then

enables you to control your Click Smart wireless control system by smart phone or

tablet devices utilising the Click Smart application.

The smart box communicates using the frequency 868MHz and enables the control

of up to 40 Click Smart receivers from one location.

The Click Smart applications are available for Android and iOS devices, with the

system offering the following functionality:

- Switching appliances (lighting, sockets, garage doors, blinds, fans etc.)

- Dimming lights (LED, energy-saving, halogen or incandescent)

- Time delay settings (delayed switching off of light when leaving room)

- Scenes (control multiple receivers with a single press)

- Automated control of receivers when programming time schedules

Thanks to the bi-directional communication, the smart box enables the current

status of individual receivers to be visible on the controlling smart devices.

During setup of the smart box, the IP address will be allocated automatically via

DHCP (Dynamic Host Configuration Protocol) and then to static. The static IP will

ensure the IP address does not change in the event of a power outage occurring.

The smart box can be powered using the plug-in adapter 10-27V DC (supplied) or

via the USB power input (USB cable not supplied).

The package includes an antenna. If the smart box is mounted within a metal

enclosure or to help improve the signal range, the antenna (

AN-E

) can be installed

(purchase separately).

The maximum tightening torque for the antenna connector is 0.56 Nm.

The smart box transmits up to 100 metres in open space. If the signal is insufficient

between the smart box and receivers the signal repeater (

RFRP-20/B

) can be used.

Attention:

The minimum distance between the smart box and any receiver is one centimetre.

Smart Box & Application Parameters:

• Maximum number of receivers - 40

• Maximum number of rooms - 40

• Maximum number of scenes - 20

• Maximum number of receivers within a scene - 20

• Maximum number of daily time schedule events - 4 x On & 4 x Off

• Maximum number of receivers that can be added to a time schedule - 10

• Maximum number of smart boxes controlled by one application - 6

• Maximum number of smart devices controlling one smart box - 8

• It is designed for smart devices with Android 4.0 or iOS 9 and higher

• Suitable for smart devices with a display resolution greater than 800 x 480

• The application language follows the language set in the OS system

Contents

Installation Check List

Smart Box Introduction

Summary of Contents for Click Smart Box











































Search results

Summary of Contents for Click Smart Box

Reviews:

Related manuals for Click Smart Box

Brands by name

Popular brands

Scolmore Click Smart Box, Installation & Control Manual

Search results

Summary of Contents for Click Smart Box

Reviews:

Related manuals for Click Smart Box

Brands by name

Popular brands