AVAYA AV SERIES
Telephone User Guide
Redial/Pause Key
The REDIAL/PAUSE key is used to automatically redial the last
number dialed. To use:
1. Lift the handset.
2. Press the REDIAL/PAUSE key.
3. The number that was last dialed will automatically be dialed.
Pause into Memory
The PAUSE key is used to program a 3 second delay into
memory. A speed dial number may need to pause during its
dialing sequence prior to entering the next set of digits to ensure
proper connections. Note: The PAUSE function counts as 1
digit when stored into a speed dial memory location.
Flash Key
The FLASH key may be programmed to operate at 100, 300, or
600mS. To program:
1. Lift the handset
2. Press the STORE key.
3. On the dial pad, press “1” for 100mS, “3” for 300mS, or “6”
for 600mS.
4. Press the STORE key again.
5. Press the FLASH key to confirm the new setting.
Hold Key-AV200 and AV300
To use, press the HOLD key. The key will illuminate indicat-
ing that the line is on hold. When placing a caller on hold, the
handset can be returned to its on-hook position. The line will not
be disconnected. To return to the caller, lift the handset.
Hold Key-AV100
The HOLD key on the AV100 is located in the
lower left base of the phone.
