Attaching the handset:
Connect the supplied coiled handset cord between the jack on the
end of handset and the jack marked with a “handset” symbol on the
left side of the telephone base unit. Place the handset on the telephone
base unit or if wall-mounted, hang it on the desk/wall-mount clip to
depress the hook switch.
Installing your telephone:
For desktop use, connect the supplied straight modular cord
between the jack on the rear of telephone and the telephone system
wall jack. Lift the handset, and a dial tone should be heard if the
telephone is correctly installed.
5S-c Key, Switch, and Connector Description -
1)
0-9, *, #:
Standard 3 x 4 telephone keypad for dialing.
2)
M1 ~M5 –
One-touch memory dialing keys. Note that these keys
are named M1 through M5 for reference but are not labeled on the
telephone. These are the five blank keys in a row above the
numeric dialing keys on the keypad.
3)
SiTouch
– Red touchbar key on front edge of phone. Functions as
an additional speed dial memory key and is usually programmed
by the user to access voice-mail functions on a PBX. Also, the
message-waiting and visual ringing indicator lamps are located
beneath the SiTouch key for easy visibility.
4)
VOL
- Adjusts the handset volume (3 levels)
5)
▲
-
Displays the previous Caller ID entry. Also used when setting
user options
6)
▼
-
Displays the next Caller ID entry. Also used when setting
user options
7)
DEL
-
Deletes Caller ID entries
8)
DIAL
-
Dials the selected Caller ID entry
9)
SET
– Selects and sets user options
10)
STORE
-
Stores numbers into speed dial memory keys
M1
~
M5
11)
FLASH
-
Generates a hook flash at the programmed flash time
(600ms , 300ms or 100ms)
12)
REDIAL
-
Redials the last-dialed telephone number
13)
PAUSE
-
Used to enter a pause during speed dial key
programming
14)
SPKR
-
Sets the
hands-free speakerphone function on or off. The
LED above this key lights when the speakerphone is on.
15)
RINGER
-
Slide switch on rear of telephone to set ringer volume
high, low or off.
16)
VOLUME
-
Slide control for adjusting the speakerphone receive
volume. This control is located on the right side of the telephone.
17)
HOLD
–
Functions as “local hold” key or a programmable
“system hold” key, depending on the user option setup. As a local
hold key, holds the telephone line off hook, even with the handset
