User Manual
Scion Tech
SC05.7150
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
Page 7
7. IR Pin Connections
9. Connecting Transmitter
1. Connect the HDMI cable to the
HDMI In
port and the source device, a premium quality HDMI cable
should be used for 4K resolutions.
2. (Optional) Connect the HDMI cable to the
HDMI Out
port and the sink device, a premium HDMI
cable should be used for 4K resolutions.
3. (Optional) Connect the IR emitter to the
IR Out
port and position the emitter in front of the source
device IR window for remote end control.
4. (Optional) Connect the IR receiver cable to the
IR In
port and position the receptor in sight of the
IR remote.
5. (Optional) Connect the
RS232
cables to the 3 pin Phoenix terminal and the control device.
6. Connect and power the transmitter using the 24V/1A power adaptor supplied, the extenders have
the option to power either end using the same power supply provided.
1
2
3
(Tip) IR Signal
(Ring) Volts +
(Body) N/C
IR Receiver Cable
Resolution / Distance
4K
394ft / 120m
1080p
492ft / 150m
Resolution / HDMI
Cable Length
4K/60Hz
4K/30Hz
1080p/60Hz
HDMI input & output
10ft / 3m
30ft / 10m
50ft 15m
Note: Premium high speed HDMI cables are recommended.
8. Cable lengths
IR Blaster Cable (Emitter)
1
2
3
(Tip) IR Signal
(Ring) Volts +
(Body) Ground
10. Connecting Receiver
1. Connect the HDMI cable to the
HDMI Out
port and the display device, a premium quality HDMI
cable should be used for 4K resolutions.
2. (Optional) Connect the audio cable to the
Audio Out
port and the display or amplifier.
3. (Optional) Connect the IR emitter to the
IR Out
port and position the emitter in front of the
displays IR window for remote end control.
4. (Optional) Connect the IR receiver cable to the
IR In
port and position the receptor in sight of the
IR remote. This will send IR data back to the source device.
5. (Optional) Connect the
RS232
cables to the 3 pin Phoenix terminal and the control device.
6. Connect and power the transmitter using the 24V/1A power adaptor supplied, the extenders have
the option to power either end using the same power supply provided.
