TS-1023 Ribbon Tension
Adjustment
(VX2/VXL)
Document Owner:
Service Department
Effective Date:
AUG-22-2022
Page 1 of 7
Purpose
This document provides instructions for adjusting the ribbon tension on the Sci-Print
VX2/VXL.
Intended Use
If experiencing issues with the ribbon ripping, or diagonal white lines through the print on
the label (ribbon wrinkles).
Required Material and Equipment
● 2.5mm Allen wrench (for Squix printer)
● 2mm Allen wrench (for A2 printer)
Intended Audience
Scinomix End User
Intended Audience
Field Service Representative from Scinomix or approved vendors.
Prerequisites
N/A
Procedure
1.
Ribbon Core.
Make sure the ribbon core is tightened against the bottom of the
ribbon take-up reel.
File Location: Google Drive
Revision: B
Approved Date: AUG-22-2022 Approved by: Service
