12300161.pdf 14 of 22
SCI20/40-Pro
■
Overload protection light changed to red, display
area shows "Er 04", indicate the current failure is
"motor protection". When the motor output shaft is
stuck that caused motor protection, should be first
pressing speed control button to stop stirring
function, remove the block material, and then
re-set original setting speed value to start stirring
function.
If these faults are not resolved, please contact manufacturer/supplier.
12
I
Preflighted by
IC
Elanc:lers
D
PASSED
□
FAILED°""""•· 2011
0838·<1
Digital Overhead Stirrer
SCI20/40-S
■
Overload protection light changed to red, display
area shows "Er 04", indicate the current failure is
"motor protection". When the motor output shaft is
stuck caused motor protection, should be first
switching OFF the instrument, remove the block
material, and then switch ON the instrument to
start stirring function.
•
