SETUP MODE
The advanced Setup Mode allows you to customize the following
meter preferences and defaults:
• P1.0 Memory Transmission
• P2.0 Clear Memory
• P3.0 Electrode (pH probe)
• P4.0 Buffer Solution (pH)
• P5.0 Ready Function
• P6.0 Temperature Units
• P7.0 Real Time Clock
• P8.0 Reset
To enter Setup Mode, press
SET
for >2 seconds while the meter is in
Normal Mode.
Note...
To exit Setup Mode without saving, press
ESC
until the Normal Mode
appears. If the meter is in Setup Mode, press
ESC
twice to exit.
P1.0 Memory Transmission
To transfer stored data from the meter to the computer:
1. Connect the USB cable to the right side of the meter, then
connect the other end of the cable with the D-sub connector
to the computer
’s serial port. Run the software associated with
this feature.
2. Press
SET
for 2 seconds to enter setup.
The
“TR” icon appears on the middle of
the LCD display and P1.0 displays
under the
“TR” icon.
3. Press
MN/MX/AV
. The
“OUT” icon flashes
on the upper display and P1.1 displays
under the
“OUT” icon. This indicates
that the memories are transferring. After
transmission, the LCD will return to P1.0.
Note...
The meter can store up to 99 records for each parameter. If you want to
transmit data for a different parameter, press
▲ to select your
parameter before entering setup.
5
