Page 15
4.
Measurement
Requirement:
The sensor is powered and running (the red LED flashes in 5 second intervals). An
adjustment (adjust) was successfully completed in the last two weeks.
4.1
MF-S-HTD with Modbus TCP option and HumiSenseWare software
With these options it is possible to calculate, visualize and document the water content of the paper.
However, this requires a paper calibration and the correct paper classification (grammage) in the
HumiSenseWare software. The paper calibration is stored in the HumiSenseWare as well. This software
also automatically compensates the different paper temperatures.
The HumiSenseWare manual can be found as a help file in this software.
4.2
MF-S-HTD with analogue output option
To calculate the water content with the analogue output option, a separate PLC program is required.
The value of the MF-S-HTD analogue output is not the water content, it is the internal value of the MF-
S-HTD sensor!
