1. Ensure that the power plug of the unit is plugged into the
mains power socket.
2. Ensure that the oven /incubator door is closed.
3. Switch on the mains power switch of the unit via the “MAINS”
rocker switch.
4. The rocker switch will illuminate and the circulation fan will
immediately operate.
5. Set the desired control temperature via the “CONTROL”
thermostat selector knob.
6. Set the “SAFETY” cut out temperature on the safety
thermostat by allowing the unit to reach the set “CONTROL”
temperature and setting the “SAFETY” temperature slightly
above the set temperature using the “SAFETY” thermostat selec-
tor knob.
SPECIFIC INSTALLATION AND OPERATING INFORMATION
Safety
Mains
Control
Illuminated mains rocker switch
Safety thermostat selector knob
Safety thermostat pilot light
Control Thermostat Selector Knob
Pilot light control
Power Chord with Plug
Fuse holder
Fan cover
Exhaust vent duct
Door handle
FRONT OF OVEN / INCUBATOR
REAR OF OVEN / INCUBATOR
ECONOMY OVEN / INCUBATOR
LEGEND
250
230
210
190
170
150
130
110
90
70
50
ECONOMY SERIES : 220 – 224 OVENS / 225 – 229 INCUBATORS
