are available (one clip plate of each size is supplied with the Roto-
Shake Genie). Additional clip plates are available for holding
additional tubes (refer to "Roto-Shake Genie Accessories")
NOTE:
Clip plates may be aligned at various angles to produce different
motions within the tubes. Before operation, rotate the platform to ensure
that the tubes will clear the Roto-Shake Genie housing.
2. Turn the speed control knob to the lowest setting and turn the power
switch on. The platform will begin to rotate, rock or orbital shake.
3. Select the speed by turning the speed control knob until the desired
speed is attained. If using the Roto-Shake Genie in a cold room, allow
the unit to acclimate to the room temperature before setting the exact
speed.
CAUTION! Failure to follow operating instructions can compromise
user's safety.
CAUTION! Ensure that the power is off before shifting operating
modes.
CAUTION! Ensure that the power is off before removing the mag-
netic platform assembly.
CARE AND HANDLING
1. Roto-Shake Genie
®
and Accessories:
The Roto-Shake Genie should be given the care normally required for any
electrical appliance. Avoid wetting or unnecessary exposure to fumes. The
surface may be cleaned with most cleaning agents. It cannot and should not
be autoclaved. The magnetic platform assembly is stainless steel and can be
cleaned with most cleaning agents. It cannot and should not be autoclaved.
For thorough cleaning and decontamination, the platform should be removed
from the Roto-Shake Genie. The clip plates and mounting strips are made of
magnetic stainless steel and can be cleaned with most cleaning agents or
autoclaved. The metal rocker tray cannot and should not be autoclaved.
Clean up any spills promptly to prevent damage. Replacement parts are
available through most laboratory equipment distributors or directly from
Scientific Industries.
CAUTION! Ensure that the power is off before cleaning the Roto-
Shake Genie.
CAUTION! Do not immerse.
Size
Diameter of Tube
Maximum Volume of Tube
Large
28 - 30mm
50ml
Medium
15 - 17mm
15ml
Small
10 - 13mm
1.5 - 2.0ml