How Do I Configure the Cable Modem Gateway?
65
128 Bit Keys
For use with Encryption Mode set to 128-bit
encryption. Enter 13-byte values for a Key. You do not
have to set all four Keys. Usually only one is needed
for a home network. Each value is represented in
hexadecimal. Use only these numbers or letters: 0, 1,
2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.
Use two numbers or letters in each box. Record your
Key values. You will need these Key values when you
set up your client (PCMCIA) wireless card. The Key
values in each respective column
must
match.
Configuring Wireless Data Rates and W
i
F
i
Thresholds
Use the Setup Wireless – Advanced page to configure your WAP data rates and
wired fidelity (W
i
F
i
) thresholds.
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the
cable modem gateway default wireless advanced settings.
Click
Advanced
in the Wireless section of the Setup page to access the Setup
Wireless – Advanced page.
Setup Wireless – Advanced Page Example
The following illustration is an example of the Setup Wireless – Advanced page.
We recommend that you do
not
change the default wireless settings that
are shown in the preceding illustration unless you are instructed to do so by your
cable service provider.
