REMOTE CONTROLS
17
REMOTE CONTROLS
PROGRAMMING FOR ADVANCED FUNCTION
In the
CBL
mode, the
M1
button can be programmed to act as a macro or favourite channel button. You can send
out up to 10 commands with one button press.
1. Press the
CBL
button to select the CBL mode.
2. Press the
M1
button and
SELECT
button simultaneously for 3 seconds. The
CBL
device LED will turn on for
20 seconds.
3. Press up to 10 buttons you wish to store. The
CBL
device LED will blink once for each command entered.
4. Press the
CH+
button to store the functions that were selected. The
CBL
device LED will blink twice to confirm
the storage of functions.
LOW BATTERY WARNING
When the batteries are low and need to be replaced, the remote control
LED
will blink 2 times in sequence
whenever a
POWER
button is pressed to turn on equipment.
MEMORY LOCK SYSTEM
This remote control is designed to retain programmed memory for 10 years, even after batteries are removed
from the remote control.
WRITE YOUR DEVICE SET-UP CODES
TV __________________ VCR __________________ DVD __________________ AUX __________________
