4011533 Rev A
43
How Do I Configure the Cable Modem Gateway?
How Do I Configure the Cable Modem Gateway?
To configure your cable modem gateway, you must first access the WebWizard
configuration pages. This section provides detailed instructions and procedures for
accessing the WebWizard pages and for configuring your cable modem gateway to
operate correctly. This section also presents examples and descriptions of each
WebWizard configuration page. Use the WebWizard pages to customize your cable
modem gateway to your needs rather than using the default settings.
Important!
The WebWizard pages and the examples shown in this section are for
illustration purposes only. Your pages will differ from the pages shown in this
guide.
Note:
If you are not familiar with the network configuration procedures detailed in
this section, contact your service provider before you attempt to change any of the
cable modem gateway default settings.
Accessing the Cable Modem Gateway
You must access the WebWizard in order to configure the cable modem gateway. To
gain access to the WebWizard, use the Web browser on the PC attached to the
gateway and complete the following steps.
1
Type the following IP address and then select
Go
:
http://192.168.0.1
. An authentication window similar to the following window
opens.
2
Leave the User Name field blank and enter your password in the Password field.
The Web browser accesses the WebWizard and displays the default
About Your
Modem
page. This page displays information about your cable modem along
with a series of tabs for accessing other WebWizard configuration and operation
features.
Summary of Contents for DPR2325
Page 125: ......
