ST2276
Scientech Technologies Pvt. Ltd.
13
Figure 8
Receiver Block diagram :
Figure 9
This is the simplest technique employed by GPS receivers to instantaneously give a
position and height and / or accurate time to a user. The accuracy obtained is a better
than 100m (usually around the 30-50m mark) for civilian users and 5-15m for military
users.
Procedure of the Experiment :
Procedure :
Following steps has to be perform while doing the experiments.
Step 1 :
Please go through the manual before performing any practical.
Step 2 :
Install the software from the CD ie. Open WinZip from the CD and run the
setup file. If you don't have WinZip then please install WinZip from the CD itself.
Step 3 :
Connect mains cord to the trainer
ST2276
. Don’t switch on the system now.
Step 4 :
Connect serial cable to the port which is available on the trainer connect
another end of the cable to PC serial port (COM 1, COM 2, COM3 etc.).
HiK-Consulting